MOBILE REPAIR FORUM

www.klatengsm.withme.us
 
HomeSearchRegisterLog inWho's Online

Share | 
 

 CruiserSuite TP Full Unlocker v1.01 released

View previous topic View next topic Go down 
AuthorMessage
Mild Man 88
Admin
Admin
avatar

Male Number of posts : 122
Registration date : 2008-04-30

PostSubject: CruiserSuite TP Full Unlocker v1.01 released   Wed Jul 16, 2008 3:05 pm




Dear all,

we have just released most wanted SonyEricsson Full Unlocker via TestPoint with Security Zone repair possibility. The CruiserSuite TP Full Unlocker requires UC-20 TestPoint cable - you can buy it from any of our resellers.

All other TestPoint solutions force the phone address bus pins to 3.3V which is exceeding its maximal allowed voltage almost twice. Only the UC-20 TP cable was designed to prevent this and avoid likely flash chip damage.

Here are release notes of CruiserSuite TP Full Unlocker v1.00:

* Simple to use & failsafe
* Supports all DB2020 plattform based SonyEricsson phones
* All current CIDs are suported
* This software is for all users who can disassemble the phone - also for inexperienced ones. (For
disassembling phones, we recommend to read proper SonyEricsson service manuals.)
* TP Full Unlocker does not destroy phone calibration data (so typical for SeTool ... )
* For the phone safety, TestPointing requires UC-20 TP cable.
* Unlike other amateur solutions which use external battery connection to the TP, our software uses
specially designed UC-20 cable which can handle different bus voltages and prevents any potential
flash chip damage.
* TP is done in two stages. Once you complete TP stage 1 you don't need to repeat it anymore.
Phone is then bootable via the 2nd testpoint anytime.
* PDF manual is available after installation as usual in Documents folder


You can download the software from our Downloads section or from this Rapidshare link.


Last edited by Mild Man 88 on Wed Jul 16, 2008 3:24 pm; edited 1 time in total
Back to top Go down
View user profile
Mild Man 88
Admin
Admin
avatar

Male Number of posts : 122
Registration date : 2008-04-30

PostSubject: Re: CruiserSuite TP Full Unlocker v1.01 released   Wed Jul 16, 2008 3:09 pm

Dear all,

we have just released new version SonyEricsson Full Unlocker via TestPoint with Security Zone repair possibility. The CruiserSuite TP Full Unlocker v1.01 now supports also full (permanent) unlock of all DB2012 phones via single (one) TP . For work you need UC-20 TestPoint cable and CruiserSuite dongle. You can buy both from any of our official resellers.

IMPORTANT: All other TestPoint solutions force the phone address bus pins to 3.3V which is exceeding its maximal allowed voltage almost twice. Only the UC-20 TP cable was designed to prevent this and avoid likely flash chip damage. UC-20 TestPoint box is a current limited variable voltage power supply with connection sensing feature.

CruiserSuite TP Full Unlocker v1.01 release info:

* Added support for full unlock of DB2012, CID 50,51,52,53
* DB2012 single testpoint full unlock
* Recovery mode feature for DB2012 - using testpoint stage 2
* Minor fixes
* Updated user guide


All features of CruiserSuite TP Full Unlocker software:

* Component of Cruiser Suite (once you have Cruiser Suite dongle, you can use it).
* Simple to use & failsafe
* Supports full unlock of all DB2020 plattform based SonyEricsson phones
* All current DB2020 CIDs are suported
* Supports full unlock of DB2012 plattform based phones, CID 50, 51, 52, 53; by one (single) TP
* This software is for all users who can disassemble the phone - also for inexperienced ones. (For
disassembling phones, we recommend to read proper SonyEricsson service manuals.)
* TP Full Unlocker does not destroy phone calibration data (so typical for SeTool ... )
* For the phone safety, TestPointing requires UC-20 TP cable.
* Unlike other amateur solutions which use external battery connection to the TP, our software uses
specially designed UC-20 cable which can handle different bus voltages and prevents any potential
flash chip damage.
* TP is done in two stages. Once you complete TP stage 1 you don't need to repeat it anymore.
Phone is then bootable via the 2nd testpoint anytime.
* PDF manual is available after installation as usual in Documents folder

You can download this latest version from our Downloads section or directly from this Rapidshare link.
Back to top Go down
View user profile
 
CruiserSuite TP Full Unlocker v1.01 released
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» New Tier Lists Released!
» A Fist Full of Dice!
» Last Full Week of June- Make it Count?
» Full size Spitfire clip
» RC electronics Part 4 - Full metal scale Land Rover

Permissions in this forum:You cannot reply to topics in this forum
MOBILE REPAIR FORUM :: BOX Repair :: Product Repair BOX :: Cruiser-
Jump to: